The pHepÃâÃ® pH tester revolutionized the industry by providing non-technical personnel with a simple, inexpensive solution to accurate pH measurement.
ÃâÃ±0.1 pH Accuracy
The pHepÃâÃ® pH tester revolutionized theÃ¢Ã¢â¬Ãâ industry by providing non-technical personnel with a simple, inexpensive solution to accurate pH measurement.
The HI98107 is used by millions of people around the world to monitor pH in laboratories and industrial applications as well as in agriculture, fish farming, food manufacturing and quality control, swimming pools and the printing industry.
With a renewable cloth junction, the pHepÃâÃ® has an extended life over typical pH testers. A normal junction clogs with use over time and a typical tester would normally have to be thrown away once the junction is too contaminated. HI98107Ã¢Ã¢â¬Ã¢â¢s junction is 2 cm long and when dirty, can be pulled out to expose a fresh section to effectively renew the pHepÃ¢Ã¢â¬Ã¢â¢s life.
Calibration is performed manually at one or two points with a trimmer located on the side of the tester.
With a battery life of 700 hours of continuous use, the pHepÃâÃ® will provide years of testing before the batteries need to be replaced.
- Renewable junction
- Easy two-point manual calibration
- 700 hour battery life
- Simple to use
|pH Range||0.0 to 14.0 pH|
|pH Resolution||0.1 pH|
|pH Accuracy||ÃâÃ±0.1 pH|
|pH Calibration||manual, two points|
|Battery Type/Life||1.5V (4) / approximately 700 hours of continuous use|
|Environment||0 to 50ÃâÃ°C (32 to 122ÃâÃ°F); RH max 95%|
|Dimensions||175 x 41 x 23 mm (6.9 x 1.6 x 0.9Ã¢Ã¢â¬Ã¢â¢Ã¢Ã¢â¬Ã¢â¢)|
|Weight||95 g (3.4 oz.)|
|Ordering Information||HI98107 (pHepÃâÃ®) is supplied with protective cap, calibration screwdriver, batteries and instructions.|